Posts tagged: polyshrink

Spirograph Shrinky Dinks (Spiral Unplugged Project)

By , February 28, 2010 9:40 pm

I promised another Spiral Unplugged Project post and I am finally here with it – at the eleventh hour (a new Monthly Unplugged Project theme begins tomorrow)!

All day yesterday I was looking after four girls in addition to my own two girls (my son was very happy to escape this overdose of estrogen by fleeing to a friend’s house).

The age of the girls ranged from 4 to 11 and after boredom appeared to be setting in, I tried this totally retro idea out on them:  Spirograph Shrinky Dinks.  Just 3 words:  THEY-LOVED-IT.

I had bought some shrink plastic at a Michael’s craft store on my last trip to the big city.  We pinned the Spirograph rings on to the plastic sheets with no problems.  NOTE:  The frosted type of paper worked out best with markers, the shiny white tended to smear.

Since my original Spirograph ball point pens were long dead after 30+ years, I had also bought some fine point Sharpies in many different colors and they worked great!  The tip was small and long enough to fit through the holes in the Spirograph disks and produce beautiful results.

Before they went in the oven, we punched holes in some of the finished Shrinky Dinks.  A regular one-hole paper punch works fine and, once shrunk, produces a hole large enough for a thread or fine wire.   If you need to thread on something larger than that, then punch several times to make a bigger hole.

The girls strung them on thread to make necklaces.  I actually have an even fancier idea in mind, so check back!

If you like this, then be sure to read my original Spirograph post.  To find out how to make your own Shrinky Dink plastic from home trash, don’t miss my Homemade Shrinky Dinks post!

Plastic – Homemade Shrinky Dinks (Weekly Unplugged Project)

By , June 15, 2008 9:15 pm

Again, I had nothing in mind last week when I picked the Unplugged Project theme of plastic. I had saved a few yogurt cups, and a mayonnaise jar hoping for inspiration, but then I suddenly remembered a really cool project that I had come across once on StumbleUpon: genuine, DIY Shrinky Dinks (by Curbly blogger Chrisjob).

I grew up in the 1970′s, the era of Shrinky Dinks, so I was probably more excited about this project than my kids were (although they were pretty eager once I explained what would happen).

+++++++++++++

1) In order to do this project, you’ll have to find some number 6 plastic containers. Grocery stores often use number 6 plastic boxes at their salad bars, or for their baked goods. I must have looked like a bit of an oddball at my local grocery picking up all the containers and raising them over my head to examine the bottoms! Be careful, because there were a few out there that looked like 6′s, but they were 5′s just lying in wait to trick me. Chrisjob suggests asking for a few free ones. I just decided it was a good excuse to buy some bran muffins…and strawberries (yes, they are number 6 too!).

20/20 hindsight advice – Try to choose containers that do not have stickers on them. The glue was very hard to remove and a few of our finished pieces were a little sticky on the back from residual glue.

2) You’ll also need colored Sharpies (permanent markers), scissors, and foil. As you see here, we bought a few key chain rings at the local art supply store since I thought the Shrinky Dinks might make a neat Fathers’ Day key chain:

3) First we cut the boxes up to create rectangles that were as large as possible. The plastic will shrink to about 30%-40% it’s original size, so keep that in mind when you cut.

4) Then we drew on them with the Sharpies. My kids did two each, one for their Dad, and one for their Pop Pop (my Dad). I did one for my Dad too!

5) I punched a hole in each piece with a hole puncher. I wasn’t sure how it would turn out, but I thought it might be easier to put the hole in now, rather than later.

6) We arranged the plastic pictures on a sheet of foil:

and put it in a preheated, 350 degree oven (177 celsius). Be sure to put the foil directly on the oven rack, with the rack at the bottom of the oven.

The shrinking is very quick. Chrisjobs says total time for a large, 5″to 6″ piece would be about 3 1/2 minutes. Ours was done in more like two, but it was also smaller to begin with, about 3 to 4″x 2 to 3″. He recommends opening the oven after about 90 seconds if you don’t have a window so as not to overcook.

We “oohed” and “aahed” in unison! It was quite spectacular. First the pieces move and curl up. Then they get smaller and smaller and eventually flatten out again.

7) When you remove them they are still soft for a very short period (10-15 seconds) if you want to bend them or shape them somehow. But be careful, they are hot. They quickly cool and become hard. You’ll notice that they are thicker too, about the thickness of a coin:

The pre-punched hole worked well. It shrank too, but remained large enough for the key chain. If there are any rough or sharp edges you can easily sand them off.

Here is the finished Daddy key chain:

And the Pop Pop key chain:

+++++++++++++++

Some other Shrinky Dink links and projects/ideas:

+++++++++++++

If you did a plastic Weekly Unplugged Project, then please put your link in Mr. Linky so that I, and others, can easily find you to gain a little inspiration. Please leave a comment too, in case Mr. Linky malfunctions.

+++++++++++++

Since I enjoyed the week where we just had a simple adjective as a theme (sticky), for next week’s Unplugged Project I thought we would try that again. The theme will be:

old

(Remember, the association can be very loose, so use your imagination!)

Hope to see you here for old!

Blog Widget by LinkWithin

Panorama Theme by Themocracy